Xcelerate Fuel ⛽ Tabs
It started with developing a more efficient burn rate in solid fuel rocket engines to studying and applying the same knowledge of chemistry to commercial and consumer hydrocarbon engines.
We developed, perfected, and patented the very first Fuel Catalyst Tablet. 35 years, and millions invested in research and development, our Fuel products are the most trusted in the industry.
How Xcelfuel Tabs Work
Combustion is a chemical oxidation reaction in which a large amount of energy is generally released. In all combustion, there is a burning element (fuel) and an element that produces combustion (oxidizing) usually gaseous oxygen.
The most common types of fuel are hydrocarbons. In a complete reaction, all the elements that make up the fuel are completely oxidized, forming products such as carbon dioxide and water (CO2 and H20) that are the desirable compounds. Sulfur oxides may occasionally appear SOx (if the fuel contains sulfur) and nitrogen oxides (NOx) depending on the temperature, amount of oxygen, and pressure. (For example; the complete and ideal gasoline reaction would be C*H18+2502----→ 16CO2 + Energy)
In incomplete combustion the oxidizer and fuel are not in the proper proportion of other compounds that exist, resulting in undesirable compounds such as carbon monoxide (CO) and coal-forming deposits (carbon and aromatic compounds in a state highly resistant to combustion).
The formation of deposits begins with spherical molecules called primary particles and branched aromatic chains. These are produced in the early stages of combustion. The various branched compounds are attracted to the primary particles which rotate at extremely high-velocity levels. When a branch is attached to a primary particle, the entire structure of the chain is rapidly wrapped around the primary particle and forms a secondary particle. These secondary particles agglomerate and form tertiary particles This can occur when several primary particles join the same chain in different branches, and then simultaneously become secondary and tertiary particles that agglomerate on the surface and will re-coat to form quaternary particles. The coated quaternary particles form deposits. The surface structures of the chain of the deposits leave exposed branches. It is in these exposed branches where the XCELFUEL technology begins to break and destroy the deposits; modifying their surface.
The deposits are acidic and attract the oxide of the XCELFUEL catalyst which is basic. When the two combine, an exothermic reaction occurs that releases a lot of energy generating carbon dioxide and water ( CO2 y H2O). The remaining compounds of this reaction have low activation energy and easily decompose at temperatures releasing a CO2 molecule and the catalyst oxide. This process will be repeated with time. The deposits are eliminated by converting them into CO2 and water.
XCELFUEL inhibits the formation of new deposits in the same way that it destroys existing deposits. It interacts with the ends of the aromatic chains and the binding sites in the primary particles. This interaction prevents the primary particles from being wrapped in complete chains blocking, or destroying the binding sites and breaking the chains.
This interference stops the process of agglomeration of deposits in the agglomeration stage of primary and secondary particles. This results in much lighter and smaller particles that do not adhere to each other and oxidize more easily. The result of this interference is a decrease in particulate emissions an increase in energy production and higher production of CO2 and water which are the desired end products of the combustion cycle.
Xcelfuel technology interacts with the longer and heavier chains. The temperature and speed determine the combustion resistance of elements in the fuel and existing carbon deposits.
This interaction allows these deposits to break and burn. The “molecular atomization” of the fuel. The destruction and burning of the surface of the deposits produce the following positive effects in the combustion process.
• Fuller and standardized combustion
• Optimal use of available oxygen
• Reduce the requirements of excess air
• Elimination of existing deposits
• Better heat transfer Lower fuel consumption
• Greater efficiency in general
XCELFUEL improves the combustion process, which leads to the following positive effects on combustion byproducts:
• Inhibition of the new formation of deposits
• Elimination of old coal deposits
• Prevention of the new formation of deposits
Decrease in:
• Fuel consumption
• Particles, smoke, and soot
• NOX, SOX, CO y VOC emissions
• Carbon content in the ash
• Dirt and corrosion due to the activity of V205
These effects lead to a significant increase in energy production by burning a larger portion of the available carbon in the fuel, and a significant reduction in corrosion due to the much lower formation of SO3, which increases the amount of SO2 than harmlessly it is captured in ashes.
We finally launched our Xcelerate formula to the general public, and it's now available to consumers in the form of a fuel Tab, and so far customers have rated the product five stars with amazing reviews.
Also, we've been hearing from customers who say that using the fuel tabs improved their engines' performance and fuel economy.
Don't purchase I repeat, DO NOT purchase another gallon of gas until you have seen the presentation of the Xcelerate Fuel Tabs!
Click the button and fill out the form to join our next live webinar. We're looking forward to seeing you there.
No comments yet
